Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

GPZ 900R Carburettors

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Fuel supply and carburettors |  GPZ 900R Carburettors

Airbox-carb rubber duct cyls 2 & 4


The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff. This is a single replacement carb rubber which will fit either number 2 or 4 carburettor.
Remember that you will need to order two, as they are sold singly.


Price Inc VAT: £11.59 (£9.66 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Airbox-carb rubber duct cyls 1 & 3


Related products:
1. Airbox rubber retaining spring
Airbox-carb rubber duct cyls 2 & 4
Airbox-carb rubber duct cyls 1 & 3 Airbox-carb rubber duct cyls 1 & 3


The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff. This is a single replacement carb rubber which will fit either number 1 or 3 carburettor.
Remember that you will need to order two, as they are sold singly.


Price Inc VAT: £11.59 (£9.66 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Airbox-carb rubber duct cyls 2 & 4


Related products:
1. Airbox rubber retaining spring
Airbox rubber retaining spring

A replacement spring that fits around the carburettor air inlet duct.


Price Inc VAT: £4.67 (£3.89 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Caliper Rubber Boot - Kawasaki
Airbox rubber retaining spring
Carburettor Repair KitCarburettor Repair Kit

Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.


Price Inc VAT: £13.56 (£11.30 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Clutch lever, Pattern. GPZ 500S A6->
Carburettor holder - aftermarket

A replacement aftermarket (Tourmax) carburettor holder, used to mount the carburettor to the cylinder head. Suitable for all models of GPZ 900R. ( 4 required. sold singly.)


Price Inc VAT: £15.16 (£12.63 Excluding VAT at 20%)


Quantity:  

Carburettor holder - aftermarket
Carburettor holder - Kawasaki Carburettor holder - Kawasaki

A replacement Kawasaki carburettor holder, used to mount the carburettor to the cylinder head. (4 required) Suitable for all models. (sold singly)


Price Inc VAT: £17.21 (£14.34 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Airbox-carb rubber duct cyls 1 & 3
Clamp, Carburettor Holder (carb side)

A replacement clamp used to hold the carburettor in the carb holder. (Closest to carburettors)


Price Inc VAT: £4.67 (£3.89 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Seal, Rocker cover Bolt - Kawasaki
Clamp, Carburettor Holder (carb side)
Clamp, Carburettor Holder (cyl head side)Clamp, Carburettor Holder (cyl head side)

A replacement clamp used to hold the carburettor holder onto the inlet stub of the cylinder head. (Closest to cylinder head)


Price Inc VAT: £5.74 (£4.78 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Seal, Rocker cover Bolt - Kawasaki
Float Bowl Gasket - KawasakiFloat Bowl Gasket - Kawasaki

A replacement Kawasaki Float Bowl Gasket.


Price Inc VAT: £8.72 (£7.27 Excluding VAT at 20%)


Quantity:  

Float bowl fastener kit

A kit of Stainless Steel Allen headed screws to replace the screws that retain the float bowls, as they often get chewed up


Price Inc VAT: £3.01 (£2.51 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Circuit tester
Float bowl fastener kit
Fuel shut off valve - Pattern

A replacement Pattern Fuel shut off valve. Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valve becoming worn. Suitable for all models.


Price Inc VAT: £8.95 (£7.46 Excluding VAT at 20%)


Quantity:  

Fuel shut off valve - Pattern
Fuel shut off valve - KawasakiFuel shut off valve - Kawasaki

A replacement Kawasaki Fuel shut off valve. Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valve becoming worn. Suitable for all models.


Price Inc VAT: £26.08 (£21.73 Excluding VAT at 20%)


Quantity:  

Carb top fastener kit

A kit of Stainless Steel Allen headed screws to replace the screws that retain the carburettor tops, as they often get chewed up


Price Inc VAT: £3.01 (£2.51 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Float bowl fastener kit
Carb top fastener kit
Carburettor diaphragm & slide assemblyCarburettor diaphragm & slide assembly

A replacement Kawasaki carburettor diaphragm and slide assembly, suitable for all UK specification models of GPZ 900R. For other models please contact us.



Price Inc VAT: £114.35 (£95.29 Excluding VAT at 20%)


Quantity:  

Needle GPZ 900R A1-A6

A replacement Kawasaki needle # N27B suitable for GPZ 900R A1-A6 models


Price Inc VAT: £18.50 (£15.42 Excluding VAT at 20%)


Quantity:  

Needle GPZ 900R A1-A6
Needle GPZ 900R A7-A8Needle GPZ 900R A7-A8

A replacement Kawasaki needle # N671 suitable for GPZ 900R A7-A8 models


Price Inc VAT: £16.82 (£14.02 Excluding VAT at 20%)


Quantity:  

Jet

A single, pattern Keihin main jet available in different sizes. The factory standard on A1-A6 models is 132.5, whilst on A7-A8 models it is 100. Sizes increase / decrease in increments of 2.5.


Price Inc VAT: £1.79 (£1.49 Excluding VAT at 20%)

Please choose size required


Quantity:  

Jet
Pilot jet #35Pilot jet #35

A replacement Kawasaki Pilot jet #35. Suitable for all models


Price Inc VAT: £8.04 (£6.70 Excluding VAT at 20%)


Quantity:  

Pilot Jet adjuster screw- Kawasaki

A replacement Kawasaki pilot jet adjuster screw.


Price Inc VAT: £11.10 (£9.25 Excluding VAT at 20%)


Quantity:  

Pilot Jet adjuster screw- Kawasaki
Spring, Pilot jet adjuster screw - KawasakiSpring, Pilot jet adjuster screw - Kawasaki

A replacement Pilot jet adjuster spring.


Price Inc VAT: £2.29 (£1.91 Excluding VAT at 20%)


Quantity:  

Washer, pilot jet adjuster screw- Kawasaki

A replacement washer for the pilot jet adjuster screw.


Price Inc VAT: £1.80 (£1.50 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Thermostat Housing O Ring
Washer, pilot jet adjuster screw- Kawasaki
O ring, pilot jet adjuster screw- KawasakiO ring, pilot jet adjuster screw- Kawasaki

A replacement O ring for the pilot jet adjuster screw.


Price Inc VAT: £1.80 (£1.50 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Thermostat Housing O Ring
Needle Jet A1-A8

A replacement needle jet, for all models.


Price Inc VAT: £22.45 (£18.71 Excluding VAT at 20%)


Quantity:  

Needle Jet A1-A8
Needle jet holder, A1-A8Needle jet holder, A1-A8

A replacement needle jet holder, suitable for all models.



Price Inc VAT: £13.64 (£11.37 Excluding VAT at 20%)


Quantity:  

Carburettor Drain Screw

A replacement drain screw for the carburettor float bowl.


Price Inc VAT: £6.65 (£5.54 Excluding VAT at 20%)


Quantity:  

Carburettor Drain Screw
O ring, float bowl drain screw - KawasakiO ring, float bowl drain screw - Kawasaki

A replacement O ring for the drain screw on the float bowls


Price Inc VAT: £1.87 (£1.56 Excluding VAT at 20%)


Quantity:  

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Fuel supply and carburettors |  GPZ 900R Carburettors

spacer
spacer