catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

O ring, Thermostat base, and water pump

O ring, Thermostat base, and water pump


A replacement O ring which fits the base of the thermostat housing where it sits on the rear manifold, and also where the metal pipe bolts into the water pump.

find out more

2.21

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

11.76

Thermostat Housing O Ring

Thermostat Housing O Ring


The O ring that seals the two thermostat housing halves. Choose from Aftermarket or Kawasaki O.E. the aftermarket O ring has been manufactured to o/e specifications on our behalf.

find out more

2.40

spacer

New additions

Gasket - Fuel sender

Gasket - Fuel sender


A replacement gasket for the GPZ 900R's fuel guage sender unit, supplied with screws.

find out more

10.67

Emergency use sidestand switch bypass

Emergency use sidestand switch bypass


The GPZ 900R's sidestand switch is an integral and very important part of the ignition system and should it fail, you run the risk of being left at the side of the road.

This is an emergency bypass connector for the sidestand switch in the event of it failing. Simply unplug the defective sidestand switch and plug in this connector, this will then provide an earth for the CDI unit. It can also be used as a diagnostic aid to isolate the sidestand switch if it is suspected of causing a misfire or irregular running.

It is highly recommended to supplement your underseat tool-kit and is intended to be used as an emergency, "get you home" measure.

SAFETY WARNING- The sidestand warning light does not work whilst this is fitted.

find out more

4.99

spacer

Clearance Corner

catalogue | GPZ 500S spares |  Clearance Corner

Front Brake Pads, Vesrah Organic



A set of Vesrah VD-344 Organic Brake Pads. Remember you need to order 1 set per disc!

Suitable for FRONT Fitment on:- ZX600 E/F : ZX750 L1-L3, M1-M2 : ZX9R B1-B3 : Zephyr 1100 ZR1100 A1-A4 : ZZR 1100 C2 - D6.





Price Inc VAT: 6.00 (5.00 Excluding VAT at 20%)


Quantity:  

Front Brake Pads, Vesrah Organic
NGK DR8EA Spark PlugNGK DR8EA Spark Plug



NGK DR8EA Spark Plug.



Price Inc VAT: 1.80 (1.50 Excluding VAT at 20%)


Quantity:  

Chain rivetting toolChain rivetting tool



This KM500 chain tool is for use on DID chains and can be used to cut and rivet any, 520, 525, 50, 530 or 532 DID chain that uses any one of DID's ZJ hollow pin rivet links.

All of the split chains that we sell are DID, and are always supplied with a ZJ rivet link.

WARNING:- This tool is for use on DID's ZJ rivet connecting link only, using it on any other manufacturers chain or rivet links is not recommended




Price Inc VAT: 30.00 (25.00 Excluding VAT at 20%)


Quantity:  

Hi Rev 740 Semi Synthetic 10W/40 Engine OilHi Rev 740 Semi Synthetic 10W/40 Engine Oil

HI Rev 740 4T Semi Synthetic 10W/40 Motorcycle engine oil. 4l can.

Price Inc VAT: 18.00 (15.00 Excluding VAT at 20%)


Quantity:  

GPZ 600R Screen, Standard Clear




A clear, standard screen for the GPZ 600R. These screens are manufactured by SKIDMARX, are pre-drilled and fit perfectly, this is the exact same shape as the original screen, and totally see through.

Image for illustration only.


Price Inc VAT: 34.67 (28.89 Excluding VAT at 20%)


Quantity:  

GPZ 600R Screen, Standard Clear
1 or less


A virtual Poundland of GPZ stuff.

5 or less


Everything in here is less than £5.

catalogue | GPZ 500S spares |  Clearance Corner

spacer
spacer