Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

GPZ 900R Clutch - Hydraulic system

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Clutch, gearlever, and gearbox |  GPZ 900R Clutch - Hydraulic system

Clutch Master Cylinder repair kit - PatternClutch Master Cylinder repair kit - Pattern

An aftermarket kit, to overhaul the Clutch Master cylinder assembly. Includes everything illustrated.


Price Inc VAT: £26.04 (£21.70 Excluding VAT at 20%)


Quantity:  

Clutch Master Piston kit - Kawasaki

A Kawasaki piston kit, to replace the Clutch Master cylinder piston assembly. Does not include dust cover, circlip or push-rod.


Price Inc VAT: £33.34 (£27.78 Excluding VAT at 20%)


Quantity:  

Clutch Master Piston kit - Kawasaki
Fastener kit Master Cylinder

A set of 4 x Stainless Steel countersunk screws to replace the screws on both the brake and clutch master cylinder lids.


Price Inc VAT: £1.52 (£1.27 Excluding VAT at 20%)


Quantity:  

Fastener kit Master Cylinder
Clutch Lever pushrod

A replacement clutch Master cylinder - lever pushrod.


Price Inc VAT: £16.37 (£13.64 Excluding VAT at 20%)


Quantity:  

Clutch Lever pushrod
Braided Steel Clutch line

A single, stainless steel overbraided hydraulic line to connect the Clutch Master cylinder directly to the Slave cylinder. Supplied with Stainless Steel end fittings.


Price Inc VAT: £29.57 (£24.64 Excluding VAT at 20%)


Quantity:  

Braided Steel Clutch line
Clutch release spacerClutch release spacer

A Kawasaki replacement clutch release spacer. (This sits behind the clutch slave cylinder assembly.)


Price Inc VAT: £7.98 (£6.65 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. O ring, Thermostat base, and water pump
Clutch Slave cylinder piston seal

A replacement clutch slave cylinder piston seal from Kawasaki.


Price Inc VAT: £9.44 (£7.87 Excluding VAT at 20%)


Quantity:  

Clutch Slave cylinder piston seal
Bleed nipple, Clutch - Stainless SteelBleed nipple, Clutch - Stainless Steel

A replacement Stainless Steel Bleed nipple for the clutch slave cylinder on all models of GPZ 900R. Not suitable for the brake calipers.


Price Inc VAT: £5.05 (£4.21 Excluding VAT at 20%)


Quantity:  

Clutch Slave cylinder Piston

A replacement Clutch Slave Cylinder piston. Supplied without the seal.


Price Inc VAT: £24.78 (£20.65 Excluding VAT at 20%)


Quantity:  

Clutch Slave cylinder Piston
Spring - Clutch Slave cylinderSpring - Clutch Slave cylinder

Spring for the Clutch Slave Cylinder Piston


Price Inc VAT: £3.83 (£3.19 Excluding VAT at 20%)


Quantity:  

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Clutch, gearlever, and gearbox |  GPZ 900R Clutch - Hydraulic system

spacer
spacer