Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

Engine casings, Rocker cover & engine mounting Bolts

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Engine |  Engine casings, Rocker cover & engine mounting Bolts

Pulser cover casingPulser cover casing

A replacement Kawasaki Pulser cover (Left Hand) casing for all models, Supplied without badge or gasket.


Price Inc VAT: £71.74 (£59.78 Excluding VAT at 20%)


Quantity:  

Pulser cover gasket - Kawasaki

A Kawasaki pulser (pick up triggers) cover gasket. (LH side of engine)


Price Inc VAT: £4.28 (£3.57 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Sump gasket - Kawasaki
Pulser cover gasket - Kawasaki
Pulser cover gasket - GraflexPulser cover gasket - Graflex

A pattern pulser cover gasket. (LH side of engine)

Manufactured to our specifications in the UK. Made from 0.5mm S/Steel reinforced Graflex. A fabulous alternative to the original item.


Price Inc VAT: £3.50 (£2.92 Excluding VAT at 20%)


Quantity:  

Badge, LH Pulser cover

A replacement badge to fit the Left hand pulser cover on all models of GPZ 900R.


Price Inc VAT: £14.51 (£12.09 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Badge, RH Clutch cover
Badge, LH Pulser cover
Bolt, Pulser coverBolt, Pulser cover

A replacement bolt for the pulser (LH) cover. Sold singly.


Price Inc VAT: £1.42 (£1.18 Excluding VAT at 20%)


Quantity:  

Plug, Pulser cover

A replacement inspection plug for the LH Pulser cover. (Don't forget the O ring!)


Price Inc VAT: £7.01 (£5.84 Excluding VAT at 20%)


Quantity:  

Plug, Pulser cover
O ring, Pulser cover plugO ring, Pulser cover plug

A replacement O ring for the Plug, on the Pulser (LH) cover.


Price Inc VAT: £3.79 (£3.16 Excluding VAT at 20%)


Quantity:  

Clutch cover casing

A replacement Kawasaki clutch cover casing, for all models except UK machines registered after 1997. Supplied without badge or gasket.

*** No Longer Available ***

Price Inc VAT: £209.27 (£174.39 Excluding VAT at 20%)


Clutch cover casing
Clutch cover Gasket - KawasakiClutch cover Gasket - Kawasaki

A replacement Kawasaki o/e clutch cover gasket


Price Inc VAT: £6.50 (£5.42 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Screen, Standard Clear
Clutch cover gasket - GraflexClutch cover gasket - Graflex

A pattern clutch cover gasket. (RH side of engine)

Manufactured to our specifications in the UK. Made from 0.5mm S/Steel reinforced Graflex. A fabulous alternative to the original item.





Price Inc VAT: £4.98 (£4.15 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Chain Rivetting Service
Badge, RH Clutch coverBadge, RH Clutch cover

A replacement badge to fit the Right hand clutch cover on all models of GPZ 900R.


Price Inc VAT: £15.49 (£12.91 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Plug and Oil Filter pack
Bolt, rocker cover

A replacement o/e bolt for the camshaft (rocker) cover. (6 required)


Price Inc VAT: £2.03 (£1.69 Excluding VAT at 20%)


Quantity:  

Bolt, rocker cover
Washer, rocker cover boltWasher, rocker cover bolt

A replacement cupped washer to fit over the rubber seal beneath the rocker cover bolts. (6) required)

Price Inc VAT: £2.11 (£1.76 Excluding VAT at 20%)


Quantity:  

Seal, Rocker cover Bolt - Kawasaki

A replacement rubber seal that seals where the bolt fits the rocker cover. These seals get compressed over time, and recede up inside their metal cover / washer. Sold singly.


Price Inc VAT: £2.76 (£2.30 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Clamp, Carburettor Holder (cyl head side)
Seal, Rocker cover Bolt - Kawasaki
Bolt engine mounting - RearBolt engine mounting - Rear

There are 2 x rear engine mounting bolts, an upper and a lower. The lower can on occasion snap! This is a single 205mm replacement bolt


Price Inc VAT: £6.04 (£5.03 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Washer, Oil drain plug.
Bolt engine mounting - Upper LHBolt engine mounting - Upper LH

A replacement 100mm allen bolt for the upper Left Hand engine mounting.


Price Inc VAT: £4.93 (£4.11 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Super Sport 4 Std Service Pack
Nut, 10mm engine mounting bolts

A Kawasaki lock nut (10mm) to suit the engine mounting bolts on all models


Price Inc VAT: £2.82 (£2.35 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Super Sport 4 Std Service Pack
Nut, 10mm engine mounting bolts

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Engine |  Engine casings, Rocker cover & engine mounting Bolts

spacer
spacer