catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

O ring, Thermostat base, and water pump

O ring, Thermostat base, and water pump


A replacement O ring which fits the base of the thermostat housing where it sits on the rear manifold, and also where the metal pipe bolts into the water pump.

find out more

2.21

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

11.76

Thermostat Housing O Ring

Thermostat Housing O Ring


The O ring that seals the two thermostat housing halves. Choose from Aftermarket or Kawasaki O.E. the aftermarket O ring has been manufactured to o/e specifications on our behalf.

find out more

2.40

spacer

New additions

Gasket - Fuel sender

Gasket - Fuel sender


A replacement gasket for the GPZ 900R's fuel guage sender unit, supplied with screws.

find out more

10.67

Emergency use sidestand switch bypass

Emergency use sidestand switch bypass


The GPZ 900R's sidestand switch is an integral and very important part of the ignition system and should it fail, you run the risk of being left at the side of the road.

This is an emergency bypass connector for the sidestand switch in the event of it failing. Simply unplug the defective sidestand switch and plug in this connector, this will then provide an earth for the CDI unit. It can also be used as a diagnostic aid to isolate the sidestand switch if it is suspected of causing a misfire or irregular running.

It is highly recommended to supplement your underseat tool-kit and is intended to be used as an emergency, "get you home" measure.

SAFETY WARNING- The sidestand warning light does not work whilst this is fitted.

find out more

4.99

spacer

Exhaust silencers, systems and pipework

catalogue | GPZ 900R spares | GPZ 900R Exhaust system |  Exhaust silencers, systems and pipework

Motad Neta PipeworkMotad Neta Pipework

MOTAD Neta pipework is Stainless Steel throughout, and similar in design to the original Kawasaki pipework. It is compatible with the original Kawasaki silencers. Access to the oil filter and sump is unrestricted. This pipework is the only real choice if you are replacing a 4-2 exhaust system. Nb The heat shields which are fitted to the original system can only be used with this pipework after some modifications.

*** No Longer Available ***


Price Inc VAT: 307.82 (256.52 Excluding VAT at 20%)


SITO Silencers - Pair

This pair of SITO GPZ 900R Silencers are finished in black chrome, are extremely close to the original silencers in appearance, and are extremely well made. They are road legal and at around half the price of the original silencers, are a popular option for those owners wishing to retain the bikes 4-2 exhaust system styling and performance. Supplied complete with silencer gaskets and clamps.
Click image for larger picture

Now Unavailable!


Price Inc VAT: 260.81 (217.34 Excluding VAT at 20%)


SITO Silencers - Pair
MOTAD Neta 4-2 Full systemMOTAD Neta 4-2 Full system

This is a complete 4 into 2 fully road legal exhaust system, manufactured by MOTAD. This full sytem features Stainless Steel Header Pipes, and Black chrome Neta silencers. Standard machines should not need to be re-jetted. Supplied with silencer gaskets, but without manifold gaskets and silencer clamps.
Click image for larger picture.

*** No Longer AVailable ***



Price Inc VAT: 495.65 (413.04 Excluding VAT at 20%)


MOTAD Neta Silencers

A pair of Neta silencers from MOTAD. In 2008 Motad stopped producing their Neta silencers with the traditional Black or Silver "orange peel" effect wrap around the silencer, and this pair of black chrome silencers are finished in a style similar to that of the original exhausts. They are fully road legal, and compatible with original pipework. Supplied without gaskets and clamps.

Click image for larger picture.

*** No Longer Available. ***



Price Inc VAT: 219.13 (182.61 Excluding VAT at 20%)


MOTAD Neta Silencers
Kawasaki Silencer  A1-A6 LH Kawasaki Silencer A1-A6 LH

The original Kawasaki replacement Left Hand exhaust silencer for A1-A6 models is no longer available.


Price Inc VAT: 276.25 (230.21 Excluding VAT at 20%)


Kawasaki Silencer A1-A6 RH

The original Kawasaki replacement Right Hand exhaust silencer for A1-A6 models is no longer available.


Price Inc VAT: 276.25 (230.21 Excluding VAT at 20%)


Kawasaki Silencer  A1-A6 RH
Kawasaki Silencer  A7-A8 LH Kawasaki Silencer A7-A8 LH

An original Kawasaki replacement Left Hand exhaust silencer for A7-A8 models. Gaskets and Clamps are not included. A7-A8 silencers vary slightly from the early models to cater for the subtle carburation differences, but can be fitted if orginality and looks are important, but additional tuning may be necessary.


Price Inc VAT: 240.60 (200.50 Excluding VAT at 20%)


Quantity:  

Kawasaki Silencer A7-A8 RH

An original Kawasaki replacement Right Hand exhaust silencer for A7-A8 models. Gaskets and Clamps are not included. A7-A8 silencers vary slightly from the early models to cater for the subtle carburation differences, but can be fitted if orginality and looks are important, but additional tuning may be necessary.

These have been superseded by a new part number which is a satin black finish, and NOT the black chrome which was the original finish.


Price Inc VAT: 240.60 (200.50 Excluding VAT at 20%)


Kawasaki Silencer  A7-A8 RH
Exhaust Heatshield Left HandExhaust Heatshield Left Hand

A replacement Kawasaki Left Hand exhaust heat shield.

***** Please note these are now supplied by Kawasaki in a matt black finish , they are not finished in black chrome.****


Price Inc VAT: 61.15 (50.96 Excluding VAT at 20%)


Quantity:  

Exhaust Heatshield Right Hand

A replacement Kawasaki Right Hand exhaust heat shield. (Left Hand illustrated)

***** Please note these are now supplied by Kawasaki in a matt black finish , they are not finished in black chrome.****


Price Inc VAT: 61.15 (50.96 Excluding VAT at 20%)


Quantity:  

Exhaust Heatshield Right Hand
C bracket - exhaust heatshieldC bracket - exhaust heatshield

A replacement C bracket for mounting an exhaust heatshield on original equipment exhaust systems.


Price Inc VAT: 7.14 (5.95 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Exhaust Manifold Gasket

catalogue | GPZ 900R spares | GPZ 900R Exhaust system |  Exhaust silencers, systems and pipework

spacer
spacer