Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

Exhaust system sundries

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Exhaust system |  Exhaust system sundries

Gasket, collector - silencer - PatternGasket, collector - silencer - Pattern

A PAIR of pattern graphite gaskets used between the pipework, and the silencer. Suitable for all models of GPZ 900R. Sold in Pairs


Price Inc VAT: £14.24 (£11.87 Excluding VAT at 20%)


Quantity:  

Gasket, collector - silencer - Kawasaki

A Kawasaki graphite gasket used between the pipework, and the silencer. Suitable for all models of GPZ 900R and sold singly.


Price Inc VAT: £13.08 (£10.90 Excluding VAT at 20%)


Quantity:  

Gasket, collector - silencer - Kawasaki
Exhaust Manifold kitExhaust Manifold kit

A money saving kit comprising 4 x copper exhaust manifold gaskets, 8 x replacement Stainless Steel studs, and 8 x replacement flanged nuts. New for 2010 - the studs are now made from Stainless Steel.


Price Inc VAT: £15.73 (£13.11 Excluding VAT at 20%)


Quantity:  

Exhaust Manifold Gasket

An aftermarket copper ring exhaust manifold gasket. 1 required per cylinder.


Price Inc VAT: £1.22 (£1.02 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Copper Washer
Exhaust Manifold Gasket
Stud, exhaust manifold Stud, exhaust manifold

A replacement Stainless Steel exhaust manifold stud. Sold singly.


Price Inc VAT: £1.20 (£1.00 Excluding VAT at 20%)


Quantity:  

Nut, exhaust manifold

A replacement exhaust manifold nut. Sold singly.


Price Inc VAT: £0.16 (£0.13 Excluding VAT at 20%)


Quantity:  

Nut, exhaust manifold
C Clamp, exhaust manifoldC Clamp, exhaust manifold

A replacement exhaust manifold C clamp. 2 x required per cylinder


Price Inc VAT: £13.50 (£11.25 Excluding VAT at 20%)


Quantity:  

Exhaust assembly paste

A 140g tube of exhaust assembly paste to help ensure a gas-tight seal when making connections.


Price Inc VAT: £4.20 (£3.50 Excluding VAT at 20%)


Quantity:  

Exhaust assembly paste
Gasket, collector balance pipe - KawasakiGasket, collector balance pipe - Kawasaki

A Kawasaki graphite gasket used on the original Kawasaki exhaust pipework to connect the collector/balance pipe. Suitable for all models of GPZ 900R and sold singly.


Price Inc VAT: £12.78 (£10.65 Excluding VAT at 20%)


Quantity:  

Clamp, silencer - Kawasaki

A replacement Black Kawasaki silencer clamp, suitable for the original equipment silencers or similar. Suitable for all models


Price Inc VAT: £9.00 (£7.50 Excluding VAT at 20%)


Quantity:  

Clamp, silencer - Kawasaki
Clamp, Balance pipe - KawasakiClamp, Balance pipe - Kawasaki

A replacement black Kawasaki collector/balance pipe clamp, only suitable for original equipment pipework.


Price Inc VAT: £9.24 (£7.70 Excluding VAT at 20%)


Quantity:  

Gasket, collector balance pipe - Pattern

A Pattern graphite gasket used on the original Kawasaki exhaust pipework to connect the collector/balance pipe. Suitable for all models of GPZ 900R and sold singly.


Price Inc VAT: £10.64 (£8.87 Excluding VAT at 20%)


Quantity:  

Gasket, collector balance pipe - Pattern
Centre stand rubberCentre stand rubber

This is the larger of the two rubbers that are fitted to the Left hand original silencer and serve as a stop/damper for the centre stand. Sold singly. Only 1 x required. (2 shown for illustration purposes) This is not the rubber that is fitted to the stand


Price Inc VAT: £2.46 (£2.05 Excluding VAT at 20%)


Quantity:  

Side-stand rubber

This is the smaller of the two rubbers that are fitted to the Left hand original silencer and serve as a stop/damper for the side-stand.


Price Inc VAT: £2.52 (£2.10 Excluding VAT at 20%)


Quantity:  

Side-stand rubber

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Exhaust system |  Exhaust system sundries

spacer
spacer