catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.

These kits are also suitable for GPZ 600R, 750R. 750A 750E (Turbo) and the GPZ 10000RX.

Please note that these kits will only overhaul the main body / plunger - they do not include components to overhaul the lid.

find out more

29.95

O ring, Thermostat base, and water pump

O ring, Thermostat base, and water pump


A replacement O ring which fits the base of the thermostat housing where it sits on the rear manifold, and also where the metal pipe bolts into the water pump.

find out more

2.21

Washer, Oil drain plug.

Washer, Oil drain plug.


An alloy oil drain plug washer. Choose from either aftermarket or Kawasaki O.E. Sold singly or in a handy workshop 6 pack.

Remember! The GPZ 900R, 750R and 1000RX all have 2 x oil drain plugs!

find out more

0.30

spacer

New additions

Mini Electrical Connector

Mini Electrical Connector


Atermarket mini connector with 2.8mm terminal, suitable for replacing damaged connections on the wiring harness and electrical equipment. ( 2 and 4 pin illustrated)

Can be constructed as either male or female, supplied with all terminals required to fully populate the connector. Simply connect the wire to the terminal, push it into the housing and a tab on the terminal locates and secures it.

Click "More " for detailed information as to what connection is required.

Available in 2, 3, 4, 6 & 9 pins.

find out more

2.40

Standard Electrical multi connector

Standard Electrical multi connector


Atermarket connector with 6.3mm terminals suitable for replacing damaged connections on the wiring harness and electrical equipment. 3 Pin T shape and 4 pin shown.

Can be constructed as either male or female, supplied with all terminals required to fully populate the connector. Simply connect the wire to the terminal, push it into the housing and a tab on the terminal locates and secures it.

Click "More " for detailed information as to what connection is required.

Available in 2, 3, 4, 6 & 9 pins. 2 pin connectors are also available as T shape.

find out more

2.00

spacer

GPZ 500S Chain & Sprockets

catalogue | GPZ 500S spares |  GPZ 500S Chain & Sprockets

Chain Lubricants



Lubricants for Chains & Sprockets.

GPZ 500 Chain & Sprocket Kits


A selection of DID Chain and sprocket kits for the GPZ 500S.

GPZ 500 Chain & Sprocket sundries


Transmission sundries.

Nuts, tab washers, bearings, cush rubbers and individual chains and sprockets.

Chain lube & Scottoilers


A selection of chain lubes and Scottoilers.

catalogue | GPZ 500S spares |  GPZ 500S Chain & Sprockets

spacer
spacer