Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

GPZ 900R Gearlever assembly

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Clutch, gearlever, and gearbox |  GPZ 900R Gearlever assembly

Gear lever - UK specGear lever - UK spec

A replacement UK specification gearlever. Suitable for all models.

*** No Longer available ***


Price Inc VAT: £46.99 (£39.16 Excluding VAT at 20%)


Tie rod, Gear linkage

A replacement tie rod for the gear lever linkage assembly.


Price Inc VAT: £5.44 (£4.53 Excluding VAT at 20%)


Quantity:  

Tie rod, Gear linkage
Gear lever linkage Gear lever linkage

A replacement swivel bearing linkage assembly for the gearlever.


Price Inc VAT: £18.54 (£15.45 Excluding VAT at 20%)


Quantity:  

Circlip, Gear lever

A replacement circlip for retaining the gear lever.


Price Inc VAT: £0.26 (£0.22 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Oil screen sump kit
Circlip, Gear lever
Rubber, Gear leverRubber, Gear lever

A replacement gear lever rubber from Kawasaki.


Price Inc VAT: £2.20 (£1.83 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Carburettor Repair Kit

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Clutch, gearlever, and gearbox |  GPZ 900R Gearlever assembly

spacer
spacer