Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

Mudguards and fenders

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Plastics & Bodywork | GPZ 900R Mudguards and Fenders |  Mudguards and fenders

Front mudguard A1-A6 - FibreglassFront mudguard A1-A6 - Fibreglass

An aftermarket fibreglass front mudguard for A1-A6 models. Pigmented in white. (Red & Black are currently unavailable.)

Some drilling / finishing may be required. *** NLA***




Price Inc VAT: £42.13 (£35.11 Excluding VAT at 20%)


Fork Brace - Kawasaki

A replacement fork brace for all models of GPZ 900R. These tend to crack around the mounting holes.


Price Inc VAT: £55.21 (£46.01 Excluding VAT at 20%)


Quantity:  

Fork Brace - Kawasaki
Screw, Fork BraceScrew, Fork Brace

A replacement countersunk screw for fork brace that goes around the rear of the front mudguard.


Price Inc VAT: £1.80 (£1.50 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Metzeler Lasertec Rear tyre 130/80/V18
Double Nut, front mudguard.

*** No Longer available *** A replacement double nut which secures the front mudguard to the fork lowers.


Price Inc VAT: £5.72 (£4.77 Excluding VAT at 20%)


Double Nut, front mudguard.
Fender Extender Fender Extender

Probably one of the best modifications that can be done to the GPZ 900R. It simply screws on to the bottom of the front fender, adding 5-6 inches, and provides a huge amount of protection for the front of the engine.


Price Inc VAT: £20.38 (£16.98 Excluding VAT at 20%)


Quantity:  

Front Fender Stainless Steel Fixing kit

A selection of 6 x Stainless Steel Allen bolts, which are used to secure the front fender to the fork lowers.


Price Inc VAT: £1.88 (£1.57 Excluding VAT at 20%)


Quantity:  

Front Fender Stainless Steel Fixing kit
Rear Fender (rear section)Rear Fender (rear section)

Many owners shorten their rear mudguards by sawing them off, This Kawasaki o/e "full length" rear section of the rear fender replacement is good for originality, but not quite so good when it comes to removing the rear wheel!
Suitable for all models. *** No Longer available ***

Price Inc VAT: £66.22 (£55.18 Excluding VAT at 20%)


Short rear fender

A black fibreglass rear fender which is considerably shorter than the original, making wheel removal a lot easier. The licence plate light will need modifying, and some drilling may be required.


Price Inc VAT: £39.06 (£32.55 Excluding VAT at 20%)


Quantity:  

Short rear fender
Rear Fender  (front section)Rear Fender (front section)

This is a replacement front section for the rear fender.(under the seat) Suitable for all models of GPZ 900R.


Price Inc VAT: £52.14 (£43.45 Excluding VAT at 20%)


Quantity:  

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Plastics & Bodywork | GPZ 900R Mudguards and Fenders |  Mudguards and fenders

spacer
spacer