Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

GPZ 900R Oil supply

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Engine |  GPZ 900R Oil supply

Rigid Oil Pipe, Sump - Head

A replacement rigid Y shaped oil pipe, which fits on the front of the engine, and tends to corrode easily.


Price Inc VAT: £54.68 (£45.57 Excluding VAT at 20%)


Quantity:  

Rigid Oil Pipe, Sump - Head
Rigid Oil Pipe - Clutch / Balance shaftRigid Oil Pipe - Clutch / Balance shaft

A replacement rigid oil pipe, which fits on the front Right Hand side of the engine adjacent to the balance shaft.


Price Inc VAT: £26.08 (£21.73 Excluding VAT at 20%)


Quantity:  

Banjo Bolt- rigid oil lines.

A replacement Banjo Bolt to suit either of the two rigid oil pipes found on the GPZ 900R. Don't forget the copper washers. Sold singly.


Price Inc VAT: £8.54 (£7.12 Excluding VAT at 20%)


Quantity:  

Banjo Bolt- rigid oil lines.
Rigid oil line washer - KawasakiRigid oil line washer - Kawasaki

A replacement Kawasaki copper washer/gasket, suitable for the rigid external oil-pipes on the GPZ 900R. Sold singly


Price Inc VAT: £0.84 (£0.70 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Exhaust Manifold Gasket
Rigid oil line washer - Pattern

A pattern replacement copper washer/gasket, suitable for the rigid external oil-pipes on the GPZ 900R. Sold singly


Price Inc VAT: £0.56 (£0.47 Excluding VAT at 20%)


Quantity:  

Rigid oil line washer - Pattern
Post Mod Oil feed PipePost Mod Oil feed Pipe

The two oil feed pipes that sit underneath the rocker cover were modified in A3 models > in an attempt to improve the oil supply to the top end of the camshafts. Most models have the post mod pipes fitted, but some have not, the unmodified pipes are only 4mm mm in diameter, whilst the wider pipes are 6mm in diameter. (2 required, sold singly)

<More info...>

Price Inc VAT: £19.46 (£16.22 Excluding VAT at 20%)


Quantity:  

Oil sight glass

A Kawasaki replacement oil sight glass


Price Inc VAT: £12.67 (£10.56 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Oil screen sump kit
Oil sight glass
Oil Cooler - Kawasaki

A replacement Kawasaki Oil cooler. Supplied without the stone screen, or oil cooler lines.


Price Inc VAT: £309.66 (£258.05 Excluding VAT at 20%)


Quantity:  

Oil Cooler - Kawasaki
Oil Cooler Mounting kitOil Cooler Mounting kit

A three part kit comprising 1 x bolt, 1 x steel collar, and 1 x rubber damper which fixes the oil cooler to its sub-frame. There are three oil cooler mounting points in total


Price Inc VAT: £4.14 (£3.45 Excluding VAT at 20%)


Quantity:  

Oil Cooler Lines - Earls

A pair of replacement Stainless Steel overbraided Oil cooler lines, manufactured by Earls racing products. These feature swaged end fittings and are direct replacements for the original equipment item. Supplied as a pair, complete with washers.



Price Inc VAT: £48.97 (£40.81 Excluding VAT at 20%)


Quantity:  

Oil Cooler Lines - Earls
Banjo Bolt, oil cooler lines - KawasakiBanjo Bolt, oil cooler lines - Kawasaki

A replacement Banjo Bolt to suit the flexible oil cooler lines. Don't forget the alloy washers. Sold singly.



Price Inc VAT: £4.36 (£3.63 Excluding VAT at 20%)


Quantity:  

Oil Cooler line washer - Kawasaki

A replacement Kawasaki alloy oil cooler line gasket, remember a total of 4 are required per flexible line. These do not fit the rigid oil pipes on the GPZ 900R, only the flexible lines to and from the oil cooler - sump. Sold singly.


Price Inc VAT: £2.14 (£1.78 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Exhaust Manifold Gasket
Oil Cooler line washer - Kawasaki
Oil Cooler line washer - PatternOil Cooler line washer - Pattern

A pattern replacement alloy oil cooler line gasket, remember a total of 4 are required per flexible line. These do not fit the rigid oil pipes on the GPZ 900R, only the flexible lines to and from the oil cooler - sump. Sold singly.


Price Inc VAT: £1.08 (£0.90 Excluding VAT at 20%)


Quantity:  

Grille, Oil Cooler

A replacement Grille / Stone screen for the original oil cooler.


Price Inc VAT: £46.64 (£38.87 Excluding VAT at 20%)


Quantity:  

Grille, Oil Cooler
Oil screen sump kitOil screen sump kit

It is important that the oil pick up screen in the sump is cleaned, as it easily clogs, and reduces the oil system's efficiency. This kit, compising an assortment of 33 individual gaskets, O rings and oil seals, and a pattern oil filter will help you remove, and refit the sump.

<More info on sump kit...>

Price Inc VAT: £48.17 (£40.14 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Gear selector oil seal 20mm
Oil Pick up screen

In extreme cases this oil pick up screen can become very clogged up, and impossible to clean, especially if silicone sealants have been used on the engine gaskets !! It's often easier and safer to renew the screen.


Price Inc VAT: £17.15 (£14.29 Excluding VAT at 20%)


Quantity:  

Oil Pick up screen
Oil PumpOil Pump

A replacement Kawasaki oil pump. Suitable for all models of GPZ 900R.



Price Inc VAT: £151.27 (£126.06 Excluding VAT at 20%)


Quantity:  

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Engine |  GPZ 900R Oil supply

spacer
spacer