Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

GPZ 900R Radiator, metal pipes, and manifolds.

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Cooling system |  GPZ 900R Radiator, metal pipes, and manifolds.

Front Cooling Manifold

Front cooling manifold pipe which bolts to the front of the engine. GPZ 900R A1-A8. Supplied without O rings and locating bolt.


Price Inc VAT: £79.61 (£66.34 Excluding VAT at 20%)


Quantity:  

Front Cooling Manifold
Bolt, cooling manifolds etc,Bolt, cooling manifolds etc,

An M6 x 12 bolt used extensively throughout the cooling system. It is used to secure the front, and rear cooling manifolds to the cylinder head, the thermostat housing to the rear manifold, and also the metal pipe to the water pump.



Price Inc VAT: £1.76 (£1.47 Excluding VAT at 20%)


Quantity:  

Rear Cooling Manifold, Pre anti icing mod.

A replacement rear cooling manifold, which is bolted to the rear of the cylinder head, this does not feature the take off for the carb anti icing modification, and is supplied without manifold O rings and Thermostat Base O ring.


Price Inc VAT: £81.52 (£67.93 Excluding VAT at 20%)


Quantity:  

Rear Cooling Manifold, Pre anti icing mod.
O ring, Cooling Manifold, KawasakiO ring, Cooling Manifold, Kawasaki

O ring for where the cooling manifolds (front and rear) enter the cylinder head. You'll need 4 for the front manifold, and 2 for the rear manifold.


Price Inc VAT: £1.92 (£1.60 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Anti Icing Coolant Filter kit
O ring, Cooling Manifold, Pattern.

An aftermarket O ring for where the cooling manifolds (front and rear) enter the cylinder head. You'll need 4 for the front manifold, and 2 for the rear manifold.
These are manufactured to the exact o/e specifications on our behalf.


Price Inc VAT: £1.14 (£0.95 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Water pump repair kit
O ring, Cooling Manifold, Pattern.
Rear Manifold, Post anti icing modRear Manifold, Post anti icing mod

A replacement rear cooling manifold, which is bolted to the rear of the cylinder head, and features a take off for the carb anti icing modification. Supplied without manifold O rings and Thermostat Base O ring.


Price Inc VAT: £79.94 (£66.62 Excluding VAT at 20%)


Quantity:  

Coolant pipe, metal, pre anti icing mod.

Coolant pipe, metal, pre anti icing mod. Connects the flexible hose on the water pump to the flexible hose on the radiator lower.


Price Inc VAT: £44.12 (£36.77 Excluding VAT at 20%)


Quantity:  

Coolant pipe, metal, pre anti icing mod.
O ring, Thermostat base, and water pumpO ring, Thermostat base, and water pump

A replacement O ring which fits both the base of the thermostat housing where it sits on the rear manifold, and also where the metal pipe enters the water pump.


Price Inc VAT: £2.10 (£1.75 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Centre section rubber RH
Radiator Fixing assembly

An assembly comprising 1 x bolt, 1 x collar, and 1 x damper to attach the radiator to it's sub-frame.


Price Inc VAT: £8.66 (£7.22 Excluding VAT at 20%)


Quantity:  

Radiator Fixing assembly
Metal pipe - water pumpMetal pipe - water pump

A replacement metal pipe - which bolts directly onto the water pump. It is supplied without drain screw, gasket or O ring. This is suitable for all models, regardless of whether the anti icing modifcation is present or otherwise.
*** This product is now of such a poor quality from Kawasaki, that we refuse to sell it.***


Price Inc VAT: £62.78 (£52.32 Excluding VAT at 20%)


Coolant pipe - water pump, post anti icing

Coolant pipe, metal, post anti icing mod. Connects the flexible hose on the water pump to the flexible hose on the radiator lower. This has the anti icing take off. It is supplied without drain screw, gasket or O ring.


Price Inc VAT: £26.69 (£22.24 Excluding VAT at 20%)


Quantity:  

Coolant pipe - water pump, post anti icing
Bolt, coolant drainBolt, coolant drain

A replacement coolant drain bolt for the metal pipe from the water pump. (Gasket shown for illustrative purposes)


Price Inc VAT: £1.20 (£1.00 Excluding VAT at 20%)


Quantity:  



Related products:
1. Gasket, coolant drain bolt
Gasket, coolant drain bolt

A replacement alloy washer / gasket for the coolant drain bolt. (Bolt shown for illustrative purposes)


Price Inc VAT: £0.66 (£0.55 Excluding VAT at 20%)


Quantity:  

Gasket, coolant drain bolt
Radiator FanRadiator Fan

A replacement Kawasaki Fan. Fits all models of GPZ 900R.


Price Inc VAT: £447.30 (£372.75 Excluding VAT at 20%)


Quantity:  

Radiator-Kawasaki

A replacement radiatior from Kawasaki.


Price Inc VAT: £490.21 (£408.51 Excluding VAT at 20%)


Quantity:  

Radiator-Kawasaki
Radiator Grille - KawasakiRadiator Grille - Kawasaki

A radiator grille / stone screen.


Price Inc VAT: £46.64 (£38.87 Excluding VAT at 20%)


Quantity:  

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Cooling system |  GPZ 900R Radiator, metal pipes, and manifolds.

spacer
spacer