catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Short rear fender

Short rear fender


A black fibreglass rear fender which is considerably shorter than the original, making wheel removal a lot easier. The licence plate light will need modifying, and some drilling may be required.

find out more

44.34

Airbox-carb rubber duct carbs 1 & 3

Airbox-carb rubber duct carbs 1 & 3



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 1 or number 3 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

13.74

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

12.96

spacer

New additions

Caliper Bleed nipple

Caliper Bleed nipple


A black brake caliper and anti -dive unit bleed nipple. The original nipple is supplied with a rubber bleed nipple cap, the aftermarket option is identical, but supplied without the cap.

Sold singly, choose from Kawasaki OE or aftermarket.

find out more

3.60

Sport 4 Std Service Pack

Sport 4 Std Service Pack


A Standard Service pack containing 4 litres, Morris Sport 4 10W-40 Mineral oil, 1 x Hi Flo oil filter, 2 x NGK Spark Plugs, 1 x sump plug washer and a pair of disposable gloves.

Suitable for all models of GPZ 500S. Please advise model.

find out more

35.36

spacer

GPZ 900R Spark Plugs, Caps and HT ignition system

catalogue | GPZ 900R spares | GPZ 900R Ignition system and Starter circuit |  GPZ 900R Spark Plugs, Caps and HT ignition system

NGK DR8ES Spark PlugNGK DR8ES Spark Plug

Choose from a standard NGK DR8ES Spark Plug or the NGK DR8EIX iridium option. Supplied with the gap pre-set at 0.60mm, which is the correct setting for the bike.

Suitable fitment for GPZ 750R, 900R & 1000RX. and early GPZ 500S A series. Sold singly.





Price Inc VAT: 4.20 (3.50 Excluding VAT at 20%)



Choice

Choice
Price
Standard DR8ES
3.50 Excluding VAT
Iridium DR8EIX
9.58 Excluding VAT


Quantity:  


People who bought this item also bought:
1. Spark Plug Spanner - Kawasaki


Related products:
1. Spark Plug Spanner - Kawasaki
2. Spark Plug socket - Thin wall
Spark Plug Cap, Original Kawasaki

A single original equipment Kawasaki spark plug cap.


Price Inc VAT: 27.90 (23.25 Excluding VAT at 20%)


Quantity:  

Spark Plug Cap, Original Kawasaki
Spark Plug Cap, NGK Spark Plug Cap, NGK

A replacement NGK spark plug cap that is identical to the original item internally. However, it does not feature the rubber bung that is designed to keep water and debris from the spark plug recess.


Price Inc VAT: 6.44 (5.37 Excluding VAT at 20%)


Quantity:  

HT Lead 1 metre

1 metre length of HT lead.


Price Inc VAT: 3.01 (2.51 Excluding VAT at 20%)


Quantity:  



Related products:
1. Spark Plug Cap, NGK
HT Lead 1 metre
Ignition Coil (Pattern)Ignition Coil (Pattern)

A replacement universal ignition coil (pattern) which can be used as a replacement for the either of the ignition coils.

Nb These are supplied without the HT leads.




Price Inc VAT: 41.69 (34.74 Excluding VAT at 20%)


Quantity:  

NGK CR1 Racing HT lead and Plug Cap

A race specification factory sealed SD05FM plug cap and 50cm silicone insulated copper core cable.

Suitable for GPZ 900R standard ignition coils. Sold singly

Price Inc VAT: 17.95 (14.96 Excluding VAT at 20%)


Quantity:  

NGK CR1 Racing HT lead and Plug Cap
Dynacoils - PairDynacoils - Pair

A pair of high output 2.2 ohm ignition coils. These bolt directly on to the existing mountings, and offer increased spark voltage. It is not possible to use existing HT leads with these coils, as the method of attachment is different, so we recommend Taylor HT leads for use with this product

*** Special Order only - Please call ***





Related products:
1. Taylor HT leads
Ignition Coil 1 & 4 - Kawasaki

A Kawasaki ignition coil for cylinders #1 & #4. Supplied complete with HT lead. (No spark plug caps)



Price Inc VAT: 105.84 (88.20 Excluding VAT at 20%)


Quantity:  



Related products:
1. Spark Plug Cap, Original Kawasaki
2. Spark Plug Cap, NGK
Ignition Coil 1 & 4 - Kawasaki
Ignition Coil 2 & 3 - KawasakiIgnition Coil 2 & 3 - Kawasaki

A Kawasaki ignition coil for cylinders #2 & #3. Supplied complete with HT lead. (No spark plug caps)


Price Inc VAT: 105.84 (88.20 Excluding VAT at 20%)


Quantity:  



Related products:
1. Spark Plug Cap, NGK

catalogue | GPZ 900R spares | GPZ 900R Ignition system and Starter circuit |  GPZ 900R Spark Plugs, Caps and HT ignition system

spacer
spacer