Online GPZ Spares

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Anti Dive unit repair kit

Anti Dive unit repair kit


These kits are unique to The GPZ Zone and contain a selection of components to overhaul BOTH of the anti dive units on early GPZ 900R's. Blown Fork seals are, in the majority of cases, the result of a seized anti dive unit plunger.
These kits are also suitable for GPZ 600R, 750R. 750A/E, 1000RX.

find out more

£22.25

Carburettor Repair Kit

Carburettor Repair Kit


Overflowing carbs is almost certainly due to either the float levels being set incorrectly, or the rubberised coating on the fuel shut off valvebecoming worn. This is a Tourmax kit featuring of all of the components needed to overhaul a carburettor. Includes replacement float bowl gasket, fuel shut off valve, pilot jet adjuster screw, spring, washer and O ring. The pilot adjuster screw features a slightly different taper, but these kits represent massive savings on Kawasaki prices. One kit will be required per carburettor. Suitable for all models.

find out more

£13.56

Fuel Tap repair Kit (De-luxe)

Fuel Tap repair Kit (De-luxe)


A Kit comprising a replacement, diaphragm, spring and 3 x gaskets, to fully overhaul the fuel tap on all models of GPZ 900R. Recommended if your tap is physically leaking fuel onto your engine casings.

find out more

£22.14

spacer

New Products

Rear Sprocket, 50 tooth.

Rear Sprocket,  50 tooth.


A replacement 50 tooth rear sprocket, suitable for all models of GPZ 900R.

Fitting a larger rear sprocket increases acceleration. This is 2 teeth larger than the 48T sprocket fitted to A7-A8 models, and 1 tooth larger than the 49T sprocket fitted to A1-A6 models.

find out more

£27.52

Front Sprocket, 15 tooth

Front Sprocket, 15 tooth


An alternative to the 17 tooth front sprocket, and suitable for all models of GPZ 900R. 17 teeth is standard on all models, this smaller 15 tooth sprocket will give increased acceleration.

find out more

£7.94

spacer

Stainless Steel Fastener kits

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Plastics & Bodywork | Fasteners and dampers |  Stainless Steel Fastener kits

Belly Pan Fasteners - StainlessBelly Pan Fasteners - Stainless

A set of 16 stainless Steel Dome headed allen screw, and washers to replace all of the fasteners found on the Lower fairing / Belly Pan.


Price Inc VAT: £4.58 (£3.82 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Plug and Oil Filter pack
Hydraulic reservoir fastener set

A very popular set of 4 x countersunk stainless steel allen screws to replace the screws found on the lid of the clutch, and brake master cylinder reservoirs


Price Inc VAT: £1.52 (£1.27 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Bleed nipple, Brake - Zinc
Hydraulic reservoir fastener set
Screen Screws - StainlessScreen Screws - Stainless

A set of 8 x dome headed screws and washers to secure the screen / windshield to the top fairing. Best used with the original washers.


Price Inc VAT: £2.90 (£2.42 Excluding VAT at 20%)


Quantity:  

Footpeg Hanger Fastener set - Stainless

A set of 10 x stainless Steel Allen bolts to replace the fasteners which secure both footpeg hangers to the frame.


Price Inc VAT: £4.96 (£4.13 Excluding VAT at 20%)


Quantity:  

Footpeg Hanger Fastener set - Stainless
Engine casing Fastener kit - StainlessEngine casing Fastener kit - Stainless

A set of 25 stainless Steel allen screw fasteners to replace all of the fasteners found on the clutch casing, ignition pulser cover and clutch lave cylinder


Price Inc VAT: £14.24 (£11.87 Excluding VAT at 20%)


Quantity:  

Grab Rail Fasteners - Stainless

A set of four Stainless Steel Allen Bolts which secure the grab rail to the tail section sub frame.


Price Inc VAT: £2.90 (£2.42 Excluding VAT at 20%)


Quantity:  

Grab Rail Fasteners - Stainless
Stainless Steel Front Pinch BoltsStainless Steel Front Pinch Bolts

A pair of Stainless Steel Allen bolts to replace the 2 x front wheel spindle pinch bolts on A1-A6 models


Price Inc VAT: £1.99 (£1.66 Excluding VAT at 20%)


Quantity:  

Stainless Steel Front Pinch Bolts A7-A8

Four Stainless Steel Allen bolts to replace the 4 x front wheel spindle pinch bolts on A7-A8 models


Price Inc VAT: £3.58 (£2.98 Excluding VAT at 20%)


Quantity:  

Stainless Steel Front Pinch Bolts A7-A8
Stainless Steel Rear Pinch BoltsStainless Steel Rear Pinch Bolts

A pair of Stainless Steel Allen bolts to replace the 2 x rear wheel spindle pinch bolts


Price Inc VAT: £4.58 (£3.82 Excluding VAT at 20%)


Quantity:  

Fuel Filler cap fastener set

A set of 7 Stainless Steel allen screws to replace the original filler cap fasteners.


Price Inc VAT: £1.98 (£1.65 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Super Sport 4 Std Service Pack
Fuel Filler cap fastener set
Bar End weight FastenersBar End weight Fasteners

A pair of Stainless Steel Allen bolts to replace the fasteners that hold the bar end weights on. Suitable for all models, but use loctite or risk losing them, as they have a habit of working loose!


Price Inc VAT: £2.50 (£2.08 Excluding VAT at 20%)


Quantity:  

Online GPZ Spares | GPZ 900R Catalogue | GPZ 900R Plastics & Bodywork | Fasteners and dampers |  Stainless Steel Fastener kits

spacer
spacer