catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

O ring, Thermostat base, and water pump

O ring, Thermostat base, and water pump


A replacement O ring which fits the base of the thermostat housing where it sits on the rear manifold, and also where the metal pipe bolts into the water pump.

find out more

2.21

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

11.76

Thermostat Housing O Ring

Thermostat Housing O Ring


The O ring that seals the two thermostat housing halves. Choose from Aftermarket or Kawasaki O.E. the aftermarket O ring has been manufactured to o/e specifications on our behalf.

find out more

2.40

spacer

New additions

Gasket - Fuel sender

Gasket - Fuel sender


A replacement gasket for the GPZ 900R's fuel guage sender unit, supplied with screws.

find out more

10.67

Emergency use sidestand switch bypass

Emergency use sidestand switch bypass


The GPZ 900R's sidestand switch is an integral and very important part of the ignition system and should it fail, you run the risk of being left at the side of the road.

This is an emergency bypass connector for the sidestand switch in the event of it failing. Simply unplug the defective sidestand switch and plug in this connector, this will then provide an earth for the CDI unit. It can also be used as a diagnostic aid to isolate the sidestand switch if it is suspected of causing a misfire or irregular running.

It is highly recommended to supplement your underseat tool-kit and is intended to be used as an emergency, "get you home" measure.

SAFETY WARNING- The sidestand warning light does not work whilst this is fitted.

find out more

4.99

spacer

GPZ 900R Steering & handlebars

catalogue | GPZ 900R spares |  GPZ 900R Steering & handlebars

Upper Headbearing - KoyoUpper Headbearing - Koyo

A replacement KOYO upper headstock, taper roller bearing for all models of GPZ 900R.

Price Inc VAT: 14.56 (12.13 Excluding VAT at 20%)


Quantity:  



Related products:
1. Upper bearing stem seal - Kawasaki
Lower Headbearing - Koyo

A replacement KOYO lower headstock, taper roller bearing for all models of GPZ 900R.


Price Inc VAT: 16.96 (14.13 Excluding VAT at 20%)


Quantity:  



Related products:
1. Lower bearing stem seal - Kawasaki
Lower Headbearing - Koyo
Lower bearing stem seal - KawasakiLower bearing stem seal - Kawasaki

The lower stem seal always gets damaged when removing the lower bearing from the headstock, so if you're replacing your headbearings, order one of these too!


Price Inc VAT: 5.22 (4.35 Excluding VAT at 20%)


Quantity:  

Upper bearing stem seal - Kawasaki

A replacement upper bearing stem seal.


Price Inc VAT: 7.80 (6.50 Excluding VAT at 20%)


Quantity:  

Upper bearing stem seal - Kawasaki
Bar end weights - Stainless SteelBar end weights - Stainless Steel

A pair of Stainless Steel bar End weights, identical in shape and weight to the originals found on A1-A6 models and are supplied complete with bolts. (Be sure to Loctite them in)

*** currently unavailable ***

Price Inc VAT: 26.04 (21.70 Excluding VAT at 20%)


Bar end weight A1-A6 models

A replacement bar end weight suitable for A1-A6 models.


Price Inc VAT: 15.08 (12.57 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Clutch Master Cylinder repair kit - Pattern


Related products:
1. Bolt, Bar end weight.
Bar end weight A1-A6 models
Bar end weight A7-A8 modelsBar end weight A7-A8 models

A replacement bar end weight suitable for A7-A8 models.


Price Inc VAT: 13.45 (11.21 Excluding VAT at 20%)


Quantity:  



Related products:
1. Bolt, Bar end weight.
2. Bar end weight D1-> models
Bolt, Bar end weight.

A replacement o/e bolt for securing the bar end weight on all models of GPZ 900R and GPZ 500S D1-> models.


Price Inc VAT: 1.92 (1.60 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Clutch Master Cylinder repair kit - Pattern
Bolt, Bar end weight.
UK Spec LH handlebar A1-A6UK Spec LH handlebar A1-A6

*** No Longer Available ***


Price Inc VAT: 107.56 (89.63 Excluding VAT at 20%)


UK Spec RH handlebar A1-A6

*** No Longer Available ***



Price Inc VAT: 125.58 (104.65 Excluding VAT at 20%)


UK Spec RH handlebar A1-A6
US Spec LH handlebar A1-A6US Spec LH handlebar A1-A6

*** This Product is No Longer available ***


Price Inc VAT: 107.56 (89.63 Excluding VAT at 20%)


US Spec RH handlebar A1-A6

The US specification bars are 2 - 3 cm taller than UK bars, but are a direct, bolt on upgrade for those who prefer a more upright riding position. Remember that if you are upgrading you will need to consider longer control cables. This is the Right Hand bar


Price Inc VAT: 130.31 (108.59 Excluding VAT at 20%)


Quantity:  

US Spec RH handlebar A1-A6
Plug, handlebar A1-A6Plug, handlebar A1-A6

*** No Longer available *** A replacement blanking plug for the end of the inboard side of A1-A6 handlebars.


Price Inc VAT: 3.08 (2.57 Excluding VAT at 20%)


A8 LH handlebar

A replacement Left Hand handlebar for GPZ 900R A8 models


Price Inc VAT: 92.98 (77.48 Excluding VAT at 20%)


Quantity:  



Related products:
1. Grip LH. GPZ 900R A7-A8, 500S D1>
A8 LH handlebar
A8 RH handlebar A8 RH handlebar

A replacement Right Hand handlebar for GPZ 900R A8 models


Price Inc VAT: 83.40 (69.50 Excluding VAT at 20%)


Quantity:  



Related products:
1. Grip RH (throttle) GPZ 900R A7-A8, GPZ 500S D1>
2. Bar end weight A7-A8 models
Handlebar A7

A7 models are the only GPZ 900R that feature a two part handlebar. This is suitable for left or right fitment.

*** No longer available ***




Price Inc VAT: 55.20 (46.00 Excluding VAT at 20%)




Related products:
1. Grip RH (throttle) GPZ 900R A7-A8, GPZ 500S D1>
2. Grip LH. GPZ 900R A7-A8, 500S D1>
3. Bar end weight A7-A8 models
Handlebar A7

catalogue | GPZ 900R spares |  GPZ 900R Steering & handlebars

spacer
spacer