catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Short rear fender

Short rear fender


A black fibreglass rear fender which is considerably shorter than the original, making wheel removal a lot easier. The licence plate light will need modifying, and some drilling may be required.

find out more

44.34

Airbox-carb rubber duct carbs 1 & 3

Airbox-carb rubber duct carbs 1 & 3



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 1 or number 3 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

13.74

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

12.96

spacer

New additions

Caliper Bleed nipple

Caliper Bleed nipple


A black brake caliper and anti -dive unit bleed nipple. The original nipple is supplied with a rubber bleed nipple cap, the aftermarket option is identical, but supplied without the cap.

Sold singly, choose from Kawasaki OE or aftermarket.

find out more

3.60

Sport 4 Std Service Pack

Sport 4 Std Service Pack


A Standard Service pack containing 4 litres, Morris Sport 4 10W-40 Mineral oil, 1 x Hi Flo oil filter, 2 x NGK Spark Plugs, 1 x sump plug washer and a pair of disposable gloves.

Suitable for all models of GPZ 500S. Please advise model.

find out more

35.36

spacer

Crankshaft and Big end bushes

catalogue | GPZ 500S spares | GPZ 500S Engine | Engine - Bottom end |  Crankshaft and Big end bushes

Big End Bushing, GPZ 500S Big End Bushing, GPZ 500S

Replacement Kawasaki Big end bushing to suit all models of GPZ 500S. Available in 3 x sizes (defined by colours) Blue, Black or Brown.

It is absolutely crucial that you order and fit the correct size as these are machined to very fine tolerances.

2 x required per big end journal, 4 x in total. Sold singly.


Price Inc VAT: 10.26 (8.55 Excluding VAT at 20%)

Size / Colour


Quantity:  

Main Bearing Bushing GPZ 500S Jrnl 2 & 3

Replacement Kawasaki Main bearing bushing for GPZ 500S journals 2 & 3. Available in 3 x sizes (defined by colours) Blue, Black or Brown. It is absolutely crucial that you order and fit the correct size as these are machined to very fine tolerances. 2 x required per journal. Sold singly.


Price Inc VAT: 7.79 (6.49 Excluding VAT at 20%)

Size / Colour


Quantity:  

Main Bearing Bushing GPZ 500S Jrnl 2 & 3
Main Bearing Bushing GPZ 500S Jrnl 1 & 4Main Bearing Bushing GPZ 500S Jrnl 1 & 4

Replacement Kawasaki Main bearing bushing for GPZ 500S journals 1 & 4. Available in 3 x sizes (defined by colours) Blue, Black or Brown. It is absolutely crucial that you order and fit the correct size as these are machined to very fine tolerances. 2 x required per journal. Sold singly.


Price Inc VAT: 13.86 (11.55 Excluding VAT at 20%)

Size / Colour


Quantity:  

catalogue | GPZ 500S spares | GPZ 500S Engine | Engine - Bottom end |  Crankshaft and Big end bushes

spacer
spacer