catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Short rear fender

Short rear fender


A black fibreglass rear fender which is considerably shorter than the original, making wheel removal a lot easier. The licence plate light will need modifying, and some drilling may be required.

find out more

44.34

Airbox-carb rubber duct carbs 1 & 3

Airbox-carb rubber duct carbs 1 & 3



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 1 or number 3 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

13.74

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

12.96

spacer

New additions

Caliper Bleed nipple

Caliper Bleed nipple


A black brake caliper and anti -dive unit bleed nipple. The original nipple is supplied with a rubber bleed nipple cap, the aftermarket option is identical, but supplied without the cap.

Sold singly, choose from Kawasaki OE or aftermarket.

find out more

3.60

Sport 4 Std Service Pack

Sport 4 Std Service Pack


A Standard Service pack containing 4 litres, Morris Sport 4 10W-40 Mineral oil, 1 x Hi Flo oil filter, 2 x NGK Spark Plugs, 1 x sump plug washer and a pair of disposable gloves.

Suitable for all models of GPZ 500S. Please advise model.

find out more

35.36

spacer

Piston, rings and Connecting rods

catalogue | GPZ 500S spares | GPZ 500S Engine | Engine - Bottom end |  Piston, rings and Connecting rods

Piston Standard GPZ 500S Piston Standard GPZ 500S

A Kawasaki replacement standard piston for all models of GPZ 500S.


Price Inc VAT: 43.25 (36.04 Excluding VAT at 20%)


Quantity:  

Piston Ring set Std size GPZ 500S

Kawasaki piston ring set for a standard piston.

1 x set required per piston, suitable for all models of GPZ 500S.


Price Inc VAT: 44.99 (37.49 Excluding VAT at 20%)


Quantity:  

Piston Ring set Std size GPZ 500S
Gudgeon pin - GPZ 500SGudgeon pin - GPZ 500S

An original equipment replacement Gudgeon pin for all models of GPZ 500S.

Sold singly


Price Inc VAT: 12.78 (10.65 Excluding VAT at 20%)


Quantity:  

Gudgeon pin circlip

A replacement Gudgeon pin circlip for all models.

Sold singly.


Price Inc VAT: 0.24 (0.20 Excluding VAT at 20%)


Quantity:  

Gudgeon pin circlip
Bolt, connecting rod - KawasakiBolt, connecting rod - Kawasaki

A replacement connecting rod bolt.

Sold singly. Suitable for all models.


Price Inc VAT: 4.32 (3.60 Excluding VAT at 20%)


Quantity:  



Related products:
1. Nut, connecting rod bolt- Kawasaki
Nut, connecting rod bolt- Kawasaki

A replacement nut to secure the connecting rod bolt.

Sold singly. Suitable for all models.

Price Inc VAT: 3.12 (2.60 Excluding VAT at 20%)


Quantity:  



Related products:
1. Bolt, connecting rod - Kawasaki
Nut, connecting rod bolt- Kawasaki

catalogue | GPZ 500S spares | GPZ 500S Engine | Engine - Bottom end |  Piston, rings and Connecting rods

spacer
spacer