catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Short rear fender

Short rear fender


A black fibreglass rear fender which is considerably shorter than the original, making wheel removal a lot easier. The licence plate light will need modifying, and some drilling may be required.

find out more

44.34

Airbox-carb rubber duct carbs 1 & 3

Airbox-carb rubber duct carbs 1 & 3



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 1 or number 3 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

13.74

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

12.96

spacer

New additions

Caliper Bleed nipple

Caliper Bleed nipple


A black brake caliper and anti -dive unit bleed nipple. The original nipple is supplied with a rubber bleed nipple cap, the aftermarket option is identical, but supplied without the cap.

Sold singly, choose from Kawasaki OE or aftermarket.

find out more

3.60

Sport 4 Std Service Pack

Sport 4 Std Service Pack


A Standard Service pack containing 4 litres, Morris Sport 4 10W-40 Mineral oil, 1 x Hi Flo oil filter, 2 x NGK Spark Plugs, 1 x sump plug washer and a pair of disposable gloves.

Suitable for all models of GPZ 500S. Please advise model.

find out more

35.36

spacer

Starter Clutch & Alternator chain

catalogue | GPZ 500S spares | GPZ 500S Engine | Engine - Bottom end |  Starter Clutch & Alternator chain

Starter clutch assembly - GPZ 500S completeStarter clutch assembly - GPZ 500S complete

A replacement Kawasaki OE Starter clutch assembly.

A classic symptom of a failed starter clutch is for the starter motor to turn the engine momentarily before "letting go" with a high pitched whine.

It is possible to replace the springs, rollers and pins, but this is not recommended unless a"crack test" is performed on the starter clutch body.

Suitable for all models of GPZ 500S.


Price Inc VAT: 87.19 (72.66 Excluding VAT at 20%)


Quantity:  

Starter clutch kit

A set of 3 x pins, 3 x springs, and 3 x rollers to overhaul the starter clutch.

Not recommended unless you are 100% sure that the starter clutch body is not cracked.

Suitable for all models of GPZ 900R and GPZ 500S


Price Inc VAT: 40.24 (33.53 Excluding VAT at 20%)


Quantity:  



Related products:
1. Full Gasket Set -
Starter clutch kit
GPZ 500S Starter chain GPZ 500S Starter chain

A Kawasaki OE replacement Starter chain.

Suitable for all models of GPZ 500S.




Price Inc VAT: 14.52 (12.10 Excluding VAT at 20%)


Quantity:  



Related products:
1. Clutch cover gasket
Primary Chain GPZ 500S

A replacement Kawasaki Primary chain.

Suitable for all models of GPZ 500S.


Price Inc VAT: 70.80 (59.00 Excluding VAT at 20%)


Quantity:  

Primary Chain GPZ 500S

catalogue | GPZ 500S spares | GPZ 500S Engine | Engine - Bottom end |  Starter Clutch & Alternator chain

spacer
spacer