catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Short rear fender

Short rear fender


A black fibreglass rear fender which is considerably shorter than the original, making wheel removal a lot easier. The licence plate light will need modifying, and some drilling may be required.

find out more

44.34

Airbox-carb rubber duct carbs 1 & 3

Airbox-carb rubber duct carbs 1 & 3



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 1 or number 3 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

13.74

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

12.96

spacer

New additions

Caliper Bleed nipple

Caliper Bleed nipple


A black brake caliper and anti -dive unit bleed nipple. The original nipple is supplied with a rubber bleed nipple cap, the aftermarket option is identical, but supplied without the cap.

Sold singly, choose from Kawasaki OE or aftermarket.

find out more

3.60

Sport 4 Std Service Pack

Sport 4 Std Service Pack


A Standard Service pack containing 4 litres, Morris Sport 4 10W-40 Mineral oil, 1 x Hi Flo oil filter, 2 x NGK Spark Plugs, 1 x sump plug washer and a pair of disposable gloves.

Suitable for all models of GPZ 500S. Please advise model.

find out more

35.36

spacer

Ignition switches, relays and LT ignition system

catalogue | GPZ 500S spares | GPZ 500S Ignition system and Starter circuit |  Ignition switches, relays and LT ignition system

GPZ 500S Sidestand switch GPZ 500S Sidestand switch

A replacement sidestand switch, supplied complete and ready to fit.
The sidestand switch is frequently the cause of an ignition misfire.

Suitable for all models of GPZ 500S.

Choose from Aftermarket or Kawasaki O.E.




Price Inc VAT: 13.94 (11.62 Excluding VAT at 20%)



Options

Options
Price
Aftermarket
(11.62 Excluding VAT)
Kawasaki O.E.
(15.35 Excluding VAT)


Quantity:  

GPZ 500S Starter Solenoid - PatternGPZ 500S Starter Solenoid - Pattern

A replacement, pattern, Starter Solenoid (relay) to suit all models of GPZ 500S. Supplied with 30 amp fuse.


Price Inc VAT: 22.48 (18.73 Excluding VAT at 20%)


Quantity:  

GPZ 500S Starter Solenoid - Kawasaki

A replacement Kawasaki Starter Solenoid to suit all models of GPZ 500S. Supplied with 30 amp fuse.


Price Inc VAT: 80.11 (66.76 Excluding VAT at 20%)


Quantity:  

GPZ 500S Starter Solenoid - Kawasaki
Clutch. Starter lockout switch

A replacement starter lockout (Clutch) switch, suitable for all models of GPZ 500S.

Choose from Aftermarket or Kawasaki O.E.


Price Inc VAT: 12.00 (10.00 Excluding VAT at 20%)



Options

Options
Price
Aftermarket
(10.00 Excluding VAT)
Kawasaki O.E.
(12.75 Excluding VAT)


Quantity:  

Clutch. Starter lockout switch
Ignition Switch UK (Pattern - 5 wire)Ignition Switch UK (Pattern - 5 wire)

An aftermarket, pattern, 5 wire ignition switch, supplied complete with 2 x keys, and the block connector. This is a direct, plug in replacement for GPZ 500S A1-A6 models.

It will also fit the GPZ 500S D1-D7 models but some modification may be required as although it is colour coded correctly, the layout within the connector may be different.

It will not fit E series machines.


Price Inc VAT: 37.87 (31.56 Excluding VAT at 20%)


Quantity:  

Battery - YUASA

YUASA YB14L-A2 batteries are supplied dry charged complete with acid.

Battery acid is highly corrosive - Handle with extreme care and read all instructions.

This cannot be shipped by air and must be shipped by road carrier.



Price Inc VAT: 55.94 (46.62 Excluding VAT at 20%)


Quantity:  

Battery - YUASA
Ignition Pick-up trigger GPZ 500S A & B seriesIgnition Pick-up trigger GPZ 500S A & B series

Replacement Kawasaki ignition pulser coil. (double trigger)

Supplied ready to fit, and suitable for all A and B models of GPZ 500S.


Price Inc VAT: 87.22 (72.68 Excluding VAT at 20%)


Quantity:  

Ignition Pick-up trigger GPZ 500S D & E series

Replacement Kawasaki ignition pulser coil. (single trigger)

Supplied ready to fit, and suitable for all D and E models of GPZ 500S.



Price Inc VAT: 83.20 (69.33 Excluding VAT at 20%)


Quantity:  

Ignition Pick-up trigger GPZ 500S D & E series
Generator cover gasket  GPZ 500SGenerator cover gasket GPZ 500S

A replacement Generator cover gasket. Suitable for all models of GPZ 500S.

Choose from Aftermarket or Kawasaki O.E.


Price Inc VAT: 10.26 (8.55 Excluding VAT at 20%)



Options

Options
Price
Aftermarket
(8.55 Excluding VAT)
Kawasaki O.E.
(10.24 Excluding VAT)


Quantity:  

CDI Igniter unit GPZ 500S A1-A6

*** This item is no longer available.***

A replacement Kawasaki CDI Igniter unit. Suitable for GPZ 500S A1-A7


Price Inc VAT: 319.80 (266.50 Excluding VAT at 20%)


CDI Igniter unit GPZ 500S A1-A6
CDI Igniter unit GPZ 500S D1->CDI Igniter unit GPZ 500S D1->

A replacement Kawasaki CDI Igniter unit. Suitable for GPZ 500S D1->


Price Inc VAT: 477.10 (397.58 Excluding VAT at 20%)


Quantity:  

catalogue | GPZ 500S spares | GPZ 500S Ignition system and Starter circuit |  Ignition switches, relays and LT ignition system

spacer
spacer