catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

O ring, Thermostat base, and water pump

O ring, Thermostat base, and water pump


A replacement O ring which fits the base of the thermostat housing where it sits on the rear manifold, and also where the metal pipe bolts into the water pump.

find out more

2.21

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

11.76

Thermostat Housing O Ring

Thermostat Housing O Ring


The O ring that seals the two thermostat housing halves. Choose from Aftermarket or Kawasaki O.E. the aftermarket O ring has been manufactured to o/e specifications on our behalf.

find out more

2.40

spacer

New additions

Gasket - Fuel sender

Gasket - Fuel sender


A replacement gasket for the GPZ 900R's fuel guage sender unit, supplied with screws.

find out more

10.67

Emergency use sidestand switch bypass

Emergency use sidestand switch bypass


The GPZ 900R's sidestand switch is an integral and very important part of the ignition system and should it fail, you run the risk of being left at the side of the road.

This is an emergency bypass connector for the sidestand switch in the event of it failing. Simply unplug the defective sidestand switch and plug in this connector, this will then provide an earth for the CDI unit. It can also be used as a diagnostic aid to isolate the sidestand switch if it is suspected of causing a misfire or irregular running.

It is highly recommended to supplement your underseat tool-kit and is intended to be used as an emergency, "get you home" measure.

SAFETY WARNING- The sidestand warning light does not work whilst this is fitted.

find out more

4.99

spacer

GPZ 500S Steering & handlebars

catalogue | GPZ 500S spares |  GPZ 500S Steering & handlebars

Upper Headbearing Upper Headbearing

An aftermarket replacement upper headstock, (steering stem) taper roller bearing for all models of GPZ 500S.


Price Inc VAT: 18.32 (15.27 Excluding VAT at 20%)


Quantity:  

Lower Headbearing

An aftermarket replacement lower headstock, (steering stem) taper roller bearing for all models of GPZ 500S.


Price Inc VAT: 18.32 (15.27 Excluding VAT at 20%)


Quantity:  

Lower Headbearing
Cap, Steering stem, GPZ 500S A1-A7Cap, Steering stem, GPZ 500S A1-A7

A replacement steering stem cap for A1-A7 models of GPZ 500S.


Price Inc VAT: 2.94 (2.45 Excluding VAT at 20%)


Quantity:  

Cap, Steering stem, GPZ 500S D1->

A replacement steering stem cap for D1-> models of GPZ 500S.


Price Inc VAT: 2.57 (2.14 Excluding VAT at 20%)


Quantity:  

Cap, Steering stem, GPZ 500S D1->
Nut, Steering Stem. GPZ 500S A1->Nut, Steering Stem. GPZ 500S A1->

A replacement 30mm steering stem nut, suitable for all models of GPZ 500S.



Price Inc VAT: 5.71 (4.76 Excluding VAT at 20%)


Quantity:  

Handlebar GPZ 500S A1-A2

Replacement handlebar for GPZ 500S A1-A7 models


Price Inc VAT: 30.91 (25.76 Excluding VAT at 20%)


Quantity:  

Handlebar GPZ 500S A1-A2
Handlebar GPZ 500S D1->Handlebar GPZ 500S D1->

Replacement handlebar for GPZ 500S D1-> models


Price Inc VAT: 28.50 (23.75 Excluding VAT at 20%)


Quantity:  

Bar end weight D1-> models

A replacement bar end weight suitable for GPZ 500S D1-> models. Earlier models did not feature bar end weights.


Price Inc VAT: 13.45 (11.21 Excluding VAT at 20%)


Quantity:  

Bar end weight D1-> models
Bolt, Bar end weight.

A replacement o/e bolt for securing the bar end weight on all models of GPZ 900R and GPZ 500S D1-> models.


Price Inc VAT: 1.92 (1.60 Excluding VAT at 20%)


Quantity:  


People who bought this item also bought:
1. Clutch Master Cylinder repair kit - Pattern
Bolt, Bar end weight.

catalogue | GPZ 500S spares |  GPZ 500S Steering & handlebars

spacer
spacer