catalogue

View Cart | Checkout | Items:, Value:

spacer
spacer

Best Sellers

Decal, Brake Caliper

Decal, Brake Caliper


An aftermarket replica of the aluminised decal for the brake caliper. Sold singly. 3.2cm diameter.

find out more

2.84

Pulser cover gasket

Pulser cover gasket


A replacement pulser cover gasket. (LH side of engine) Suitable for all models of GPZ 900R, 750R & 1000RX,

Choose from the original Kawasaki O.E. item, or from an aftermarket option.

The aftermarket Graflex gasket is manufactured in the UK from 0.5mm S/Steel reinforced Graflex.

BUY 2 GET 1 HALF PRICE

find out more

3.68

Airbox-carb rubber duct carbs 2 & 4

Airbox-carb rubber duct carbs 2 & 4



The inlet rubbers between the airfilter box and carburettors harden over time, and quickly become impossible to re-fit due to being too stiff.

This is a single replacement model specific inlet rubber which will fit either number 2 or number 4 carburettor. (900R,1000RX & 750R)

Remember that you will need to order two, as they are sold singly.

(The GPZ 600R and 750A use the same inlet rubber for all 4 carburettors)

find out more

11.76

spacer

New additions

Emergency use sidestand switch bypass

Emergency use sidestand switch bypass


The GPZ 900R's sidestand switch is an integral and very important part of the ignition system and should it fail, you run the risk of being left at the side of the road.

This is an emergency bypass connector for the sidestand switch in the event of it failing. Simply unplug the defective sidestand switch and plug in this connector, this will then provide an earth for the CDI unit. It can also be used as a diagnostic aid to isolate the sidestand switch if it is suspected of causing a misfire or irregular running.

It is highly recommended to supplement your underseat tool-kit and is intended to be used as an emergency, "get you home" measure.

SAFETY WARNING- The sidestand warning light does not work whilst this is fitted.

find out more

4.99

Centre stand rubber

Centre stand rubber


This is a Kawasaki OE stand/stop rubber that fits the main centre stand.

find out more

3.00

spacer

GPZ 500S Tools & Workshop

catalogue | GPZ 500S spares |  GPZ 500S Tools & Workshop

Workshop Lubricants



General Purpose & Specialist oils, greases, lubricants and aerosol sprays.

Workshop ToolsWorkshop Tools



A range of GPZ 500S specific and general hand tools including spanners, sockets and screwdrivers - all selected with the GPZ 500S in mind.
On Bike ToolsOn Bike Tools

A selection of tools aimed at your emergency tool kit and the roadside repair scenario!

All tools in this section are small compact and relevant to the GPZ 500S, they are cost effective, and will not fail you when you need them!
Workshop equpment & manualsWorkshop equpment & manuals



A selection of workshop & servicing equipment, including workshop manuals

catalogue | GPZ 500S spares |  GPZ 500S Tools & Workshop

spacer
spacer